Trying to come up with new card design ideas? Make a paper cutout like this one to experiment with! Besides expressing gratitude to my father for allowing me to retain his X-acto knife and cutting board, I really need to invest in a new one. Despite the fact that these tactics are simple to outline, they might be difficult to execute if you don’t have any prior expertise. The time it took me to finish this assignment was a couple of hours.
The Conceptual Framework
Papers should be folded in half then cut in half again. Make a rough drawing of the design that you’ve chosen. It is vital that your design be easy to understand (along the lines of measure twice cut once, you want to know where to cut for your design). If you’re like me and find it difficult to come up with a design on your own, I recommend taking some time to look at other people’s cards to gain some inspiration. Please visit LightboxGoodman for more info.
Making use of a knife and adhesive
Using an X-acto knife, carefully cut out your pattern after you’ve reached your satisfaction. Precautions should be taken while cutting thin parts and letters since they may easily be torn when cutting. After you’ve cut out your design, you should clean away any pencil lines that remain. Glue your piece of paper on the other piece of paper until it is completely adhered. Preventing neck pain and giving your hand a rest are two important reasons to take regular cutting stops. When it comes to neck ache, the sloped surface may be really advantageous! A compass is required in order to cut tiny holes, notably eyes, in the wood. To float the cuts within the pattern, a double-glass box frame or a regular box frame with a layer of acetate might be used. Acetate sheets are also available for this purpose from us! A little dab of glue will hold your frame back together, with your cut sandwiched between the two pieces of glass or acetate as a filler. Voila! Another word of caution: remember to have fun and avoid bleeding excessively across your paper!
As soon as anything goes wrong,
Whatever happens, don’t quit up even if your scalpel slips (or in my case snaps*). You are not alone in your feelings. Damage to a portion of your artwork may be easily repaired using common household items and tools. Glue a piece of adhesive tape on the side of your design where you want it to be visible from the front (after you have removed the paper with the design on it). After applying pressure to the tape join, trim away any excess tape using a knife if necessary. It is unlikely to be detected. If the adhesive tape doesn’t work, you may try glueing a little sliver of card over the crack as an option. Please allow for complete drying before clipping away any extra adhesive.